Tyres guarantee adherence even when the road is wet, an impeccable behaviour when taking a curve and an efficient breaking, but also add comfort to driving. In other words, it brings safety, efficiency and comfort. Tyre assembly and fitting. It will eliminate annying vibrations on the steering wheel and avoid early damage to the steering control components and suspension. Valves alignment and replacement. Minimizing wear and tear of your alloy wheels. Incorrect alignment is the main reason behind early wear and tear. Through the years, a properly aligned vehicle can endure longer and provide a better functioning of the wheels. A damaged tyre can cause a technical inspection negative report. This can be identified by the measurements written on the side of the tyre. For instance, “205/65 R15 91V” consists of: 205 mm width; 65 height/width % ratio; R15 for 15-inch radial tyre; 91 load index, which states the maximimg weight the vechicle can take; V stands for maximum velocity the vehicle can put up with when transporting the cargo.
According to the current legislation, only authorized measurements and technical specifications components can be used, stated in the technical inspection report for each vehicle.
Tyre inspection
Tyre inspection is highly recommended after 10.000 km. They should be replaced when the tyre is worn to the legal limit (1,6 mm), when the bars will be flush with the surface of the tread, or in the case of damages, irregular wear or deformations. A flat tyre, especially if the damage appears on the side, should usually be replaced immediately. Also when they’re over 5 years old, as adherence will be reduced on wet or snowy roads. Spare wheels and anti-puncture systems. Compact, practical, whick and easy to use, anti-puncture systems allow us to temporarily inflate the tyre before a more permanent fix can be done.
We provide tyres for:
- Small vehicules
- Medium size vehicles
- Minivans
- Luxury and sports cars
- Summere tyres
- Winter tyres
- All season tyres